personal mini gold trommel
mini gold trommel wash plant
Small Gold Trommel Wash Plant
small Mini gold Trommel Wash Plant
Mini Gold Trommel Wash Plant
Heckler Fabrication
www.hecklerfabrication.com
www.hecklerfabrication.com
Mining Equipment
Mining Equipment,
916-782-1777

916-782-1777
Heckler Fabrication
MINI GOLD TROMMEL
5-7+ TONS PER HOUR
Email for options & pricing.
sales@hecklerfabrication.com
small personal gold trommel wash plant
The Mini Trommel is an extremely portable and versatile unit that can be towed behind an ATV.
The unit has a wide stance and good center of gravity with good ground clearance which is perfect
for difficult terrain. The durable pneumatic tires are 15.5 inch in diameter and come with sealed
bearings [ .Also offered is an optional ATV tire/axle combination for even better maneuverability
off road ]. The tow bar is removable by way of a 1/2 inch hitch pin. The Mini can be easily set up
and ready to run in a matter of minutes.  The legs are fully adjustable in height to compensate for
varying terrain & also to adjust material processing rates.
The Mini can be disassembled  without tools into its major components in under 1 minute
to facilitate loading & unloading by one person into/out of a standard truck bed or trailer, this
also enables packing into remote locations as well.  The all steel frame is fully triangulated for
maximum durability while still reaming light weight enough to maneuver the unit by hand.
The unit is powered by a Gas driven motor with a 6-1 reduction box with a heavy duty skid plate
underneath [ other options available such as Diesel or Electric barrel drive as well. ] The fuel tank
is remote mounted & comes with an inline fuel filter. The heavy duty positive chain drive system
utilizes sealed unit bearings and is fully adjustable in tension both at the motor as well as
the barrel. The drive system is geared for 6-13 RPM and is strong enough to process full loads at
idle.

The Feed Hopper comes with a full spray bar system with a "pusher jet" for quick and easy
processing of materials as well as excellent material washing. The Feed Hopper is fully removable
with four 3/8 inch locking pins and can be quickly exchanged with either of our
optional quick
release 3 inch or 4 inch Dredge Adapters. The removable Dredge Adapter is designed to feed
directly into the barrel without the need for the Feed Hopper.

The 2-stage barrel is 6 foot in total length and 15 inch in diameter. The "Scrubber" section of the
barrel is 24 inch in length and is loaded with a full array of slurry "turn plates" [material lifting
bars] as well as slurry dams, both of which enable excellent clay and cemented gravel
break down and washing. This unit has one of the best working "Scrubber" sections available for
a unit this size and helps level out the material "surging" that is common with shorter barrels.
The screen portion of the barrel is 36 inch in length and is manufactured from perforated steel
[punch plate] with the highest percentage of "open area" available to help produce some of the
highest Tons per Hour numbers available to the open market.  Classification hole size is 1/2 inch
standard with other sizing options available upon request. The tail section of the barrel contains
two of our "Nugget rings" for retention of over sized values. Not shown is the safety cover over
the gearing on the barrel.

The water delivery system consists of an adjustable angle- full length spray bar inside the barrel
that is easily removable by way of two quick release pull pins and is fully adjustable in flow rate
with its own gate valve. The Feed Hopper also contains a perimeter spray bar that is also easily
removable as well as adjustable in angle and also comes with its own gate valve for flow
adjustment. The Hopper spray bar also contains a "pusher" jet to aid in consistent material feed
when shoveling or feeding by bucket. The Hopper also has a quick release safety cover to protect
the spray bar from damage and provides a sturdy place to "bang" the shovel clean or rest a
bucket. This unit will easily process 2- 3.5 full five gallon buckets of material per minute so we
felt there was no real need for a "bucket rest" feature in or on the Feed Hopper for this unit
[though available as an option]. The water distribution box also has a connection for a wash out
hose.

The included sluice box measures in at 60 inches long by 10 inch wide and is more than adequate
at keeping up with the feed rate associated with this Trommel unit. Standard riffle design is a  
"70/30" mix of 3# Gratex [large expanded] and Hungarian style riffles that have varied spacing
and angles to ensure great recovery percentages of values. We can also custom tailor the sluice
recovery system to the specific recovery needs of
your particular operation as well.
Also included with the sluice is one of our infamous "Bubble Brushes" to virtually eliminate  
bubbles in the slurry and also provides a smooth flow transition to the riffles. The sluice comes
with a full  square tube "ladder" style frame and fully adjustable legs to enable ease of
adjustment of sluice angle.
When setting up for operation, the sluice can be mounted on either side of the Trommel unit with
a single 3/8 inch grade 8 quick release mounting pin which allows for ease of adjustment to most
any angle. When in transport the Sluice box can be mounted to the top of the Trommel frame and
strapped down for safety.
Dual "nugget retention"
rings
for over-sized values.
Quick release Protection Plate & spray bar assemblies
facilitate easy clean out for less "down time".  
Over-sized chain drive speed reduction system
ensures long,  dependable, worry free service life.
Heavy duty Slurry turn plates and dams ensure a
long service life as well as excellent clay break
down.
With 1,695 square inches of screen area this
little Trommel is a real workhorse.
Standard Options Available:

Optional Feed Hopper [For use w/ Mini-excavator or Backhoe]                         $980 usd

Large ATV Tire/axle addition                                                                            $590 usd

Mounted on Small Roadworthy Trailer                                                               $650 usd

Honda Motor                                                                                                      $109 usd

Dredge Hose Adapter (3in)                                                                              $195 usd

"Add-On Sluice" [Converts Sluice system to 2-piece /Multi-Stage]          $1,100 usd
Email inquiries/orders to: sales@hecklerfabrication.com    *Phone inquiries/orders:916-782-1777 Roseville CA. 95747
All designs of Heckler Fabrication are sole Copyright - 2014
HECKLERS FACEBOOK PAGE
custom builds
parts and supplies
2410 Series Trommel
contact
email problems
email sent
highbanker 8'x10"
index home
sitemap
links
Highbanker 5'x10"
Highbanker 10x10"
Highbanker 1020-C
159 Series Trommel
V-Series Trommel
3610 Series Trommel
Mini Trommel
Optional
Quick release
3 inch Dredge hose adapter
diesel powered mini trommel wash plant
Diesel driven
[ Electric start ]
"CS" Model shown
"Mini" series Portable Gold Trommel
[ Gas ] Standard [ 5-7+ TPH]      $4,200



With "Diesel or Electric" drive system
[ C.S. Diesel ]       Mini-I    [5-7+ TPH]  $4,800
[ Kohler Diesel ]    Mini-I    [5-7+ TPH]  $5,900
[ Electric ]            Mini-E   [5-7+TPH]   $4,500
Easily tows behind an ATV
diesel powered mini trommel wash plant
*NEW for 2015*
Diesel Powered!
Heckler Fabrication
produces The
ONLY Diesel Driven
"Mini" Trommel Wash Plants
Manufactured in the United States.
Gas driven model shown
"Mini-KD"
Kohler Diesel /
Premium model
Electric Start
"Mini-CS"
C.S. Diesel /
Economy model
Electric Start
Optional Feed Hopper
For use with Mini Excavator or Backhoe
Use it alone, bring your friends,
or invite the whole camp,
the Mini Trommel can keep up!
12" x 60"  
[304mmx1524mm]
2-stage
Sluice Box
recovery system
included
Standard Feed Hopper Shown
Shown with optional "Add-On" sluice system
We ship World Wide
OPTIONAL
ATV TIRE & AXLE
Package
Mini-Max series Trommel Wash Plant


PRINTABLE [PDF] SALES BROCHURE       
PORTABLE GOLD TROMMELS        
Click on link below for:
PAN-AMERICAN Jigs