| Heckler Fabrication |
www.hecklerfabrication.com
www.hecklerfabrication.com
Heckler Fabrication
Mining Equipment
Mining Equipment,
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
916-782-1777
916-782-1777
| PORTABLE GOLD TROMMEL MODEL |
| "2410" |
| 20-30+ TONS PER HOUR |
| The 2410 comes complete with four fully adjustable leveling jacks to ensure stability. Jacks also swing up for transport. |
| Feed Hopper is fully adjustable in angle by way of long travel manual hydraulic ram to enable "fine tuning" of feed rate. |
The "2410" Portable Trommel Wash Plant is designed for commercial mining. This
unit is a versatile & mobile placer processing plant that is virtually "plug and play".
It is a self contained, portable unit that is well suited for small/medium scale
commercial mining, exploration or batch sampling. Its mobility is specially suited to
move up and down the alluvial plain, moving the plant to the ore instead of excavating
and hauling ore to a stationary plant.
The plant can shift location on the fly taking only minutes to reposition using the 4
leveling jacks. The "2410" features exceptional fine gold recovery and is a Very
unique and efficient plant. Easy to operate with low maintenance, it is extremely
durable and dependable, perfect for hassle free service at remote locations.
unit is a versatile & mobile placer processing plant that is virtually "plug and play".
It is a self contained, portable unit that is well suited for small/medium scale
commercial mining, exploration or batch sampling. Its mobility is specially suited to
move up and down the alluvial plain, moving the plant to the ore instead of excavating
and hauling ore to a stationary plant.
The plant can shift location on the fly taking only minutes to reposition using the 4
leveling jacks. The "2410" features exceptional fine gold recovery and is a Very
unique and efficient plant. Easy to operate with low maintenance, it is extremely
durable and dependable, perfect for hassle free service at remote locations.
The model "2410" Portable Trommel wash plant is based on a custom heavy duty twin
axle chassis that enables easy maneuverability in tight situations and is complete with a
telescoping hitch tongue that is easily removable for added security.
The standard model "2410" Trommel Wash Plant is powered by a gas driven engine
driving an over sized chain drive reduction system for a long dependable service life.
Final drive is adjustable between 6-13 rpms. Other drive options available such as Diesel
or Electric. [See PDF sales brochure link above] The Wash Plant sports a 2 stage /
2-piece - 24" Diameter Barrel with an overall length of 10'. Inside the 4' "scrubber"
section of the barrel are heavy duty slurry turn plates and dams to hold the slurry in the
barrel for better clay breakdown. The screen section of the barrel classifies to 1/2" minus
and is 5' in length giving 4,521 sq. inches of overall screen area [ 2.5 times more screen
area of other similar sized wash plants on the market. ]
In the tail section of the barrel are two "nugget catch" rings for retention of over-sized
values. Inside the barrel is a full length 2"diam. spray bar system that is fully adjustable
and easily removable for cleaning. Not shown is a removable long barrel discharge chute
that stows for transport.
The main hopper is fully adjustable in angle enabling better feed rate adjustment as well
as wash duration of oversize material before discard. The hopper features a large feed
area measuring in at 60"W x 84"L and the removable "grizzly"classifies to an initial size
of 4" and comes complete with two full width adjustable 2" diam. spray bars. All three
spray bars for this unit are set on their own gate valves for the ultimate in water flow
adjustment.
Included with the "2410" Gold Trommel is a complete and ready to run 2-stage sluice
measuring in at 24"w x 10' long. Mounted to one of our durable 1in. x 2in. rectangle
tube frames with 6 fully adjustable legs.
We offer many other different options of sluice box configurations for this model,
as well as Jig options.
Overseas shipping by way of 20 sea container
axle chassis that enables easy maneuverability in tight situations and is complete with a
telescoping hitch tongue that is easily removable for added security.
The standard model "2410" Trommel Wash Plant is powered by a gas driven engine
driving an over sized chain drive reduction system for a long dependable service life.
Final drive is adjustable between 6-13 rpms. Other drive options available such as Diesel
or Electric. [See PDF sales brochure link above] The Wash Plant sports a 2 stage /
2-piece - 24" Diameter Barrel with an overall length of 10'. Inside the 4' "scrubber"
section of the barrel are heavy duty slurry turn plates and dams to hold the slurry in the
barrel for better clay breakdown. The screen section of the barrel classifies to 1/2" minus
and is 5' in length giving 4,521 sq. inches of overall screen area [ 2.5 times more screen
area of other similar sized wash plants on the market. ]
In the tail section of the barrel are two "nugget catch" rings for retention of over-sized
values. Inside the barrel is a full length 2"diam. spray bar system that is fully adjustable
and easily removable for cleaning. Not shown is a removable long barrel discharge chute
that stows for transport.
The main hopper is fully adjustable in angle enabling better feed rate adjustment as well
as wash duration of oversize material before discard. The hopper features a large feed
area measuring in at 60"W x 84"L and the removable "grizzly"classifies to an initial size
of 4" and comes complete with two full width adjustable 2" diam. spray bars. All three
spray bars for this unit are set on their own gate valves for the ultimate in water flow
adjustment.
Included with the "2410" Gold Trommel is a complete and ready to run 2-stage sluice
measuring in at 24"w x 10' long. Mounted to one of our durable 1in. x 2in. rectangle
tube frames with 6 fully adjustable legs.
We offer many other different options of sluice box configurations for this model,
as well as Jig options.
Overseas shipping by way of 20 sea container
| Heckler Fabrication offers many different design and equipment options for this unit including 2 INTERNATIONAL MODELS that feature Diesel or Electric drive. Pricing and options for this unit are located in the Printable PDF Sales Brochure All trailer based units are sold as off-road use only |
| Heckler Fabrication |
www.hecklerfabrication.com
www.hecklerfabrication.com
Heckler Fabrication
Mining Equipment
Mining Equipment,
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
916-782-1777
916-782-1777
| PORTABLE GOLD TROMMEL MODEL |
| "2410" |
| 30+ TONS PER HOUR |
Matching Sluice Box Included. |
"2410" series Portable Gold Trommels Model # 2410 [ 30+ Ton/Hr. ] $21,860 With "Diesel or Electric" drive systems [ Diesel ] Model # 2410-I [ 30+Ton/Hr. ] $25,600 [ Electric ] Model # 2410-E [ 30+Ton/Hr.] $24,980 Model # 2410-V [ 30+Ton/Hr. ] $29,890 "V" series Portable Gold Trommel With "Vibrating" feed hopper |
| Also available |
The "2410" Portable Trommel Wash Plant is designed for commercial mining. This
unit is a versatile & mobile placer processing plant that is virtually "plug and play".
It is a self contained, portable unit that is well suited for small/medium scale
commercial mining, exploration or batch sampling. Its mobility is specially suited to
move up and down the alluvial plain, moving the plant to the ore instead of excavating
and hauling ore to a stationary plant.
The plant can shift location on the fly taking only minutes to reposition using the 4
leveling jacks. The "2410" features exceptional fine gold recovery and is a Very
unique and efficient plant. Easy to operate with low maintenance, it is extremely
durable and dependable, perfect for hassle free service at remote locations.
unit is a versatile & mobile placer processing plant that is virtually "plug and play".
It is a self contained, portable unit that is well suited for small/medium scale
commercial mining, exploration or batch sampling. Its mobility is specially suited to
move up and down the alluvial plain, moving the plant to the ore instead of excavating
and hauling ore to a stationary plant.
The plant can shift location on the fly taking only minutes to reposition using the 4
leveling jacks. The "2410" features exceptional fine gold recovery and is a Very
unique and efficient plant. Easy to operate with low maintenance, it is extremely
durable and dependable, perfect for hassle free service at remote locations.
| Diesel, Gas or electric driven models available |
| Call or Email for unit options. 916-782-1777 sales@hecklerfabrication.com |
| Standard Options Available: "EX" Model Extended scrubber barrel section w/ turn-plates/dams/additional frame length (doubles length of scrubber section) $3,300 Fender Kit $375 Trailer Brakes /w Lights Kit $675 Sluice Box locking security screens $550 Extended Sluice box length (additional 24in) $325 Spare Parts Kit $599 |
| Feed Hopper is fully adjustable in angle by way of long travel manual hydraulic ram to enable "fine tuning" of feed rate. |
| 2410-EX [ optional extended scrubber barrel section ] |
| 2410-EX with extended scrubber barrel section shown |
| 2410-EX [ optional extended scrubber barrel section ] |
| Email inquiries/orders to: sales@hecklerfabrication.com *Phone inquiries/orders:916-782-1777 Roseville CA. 95747 |
| All designs of Heckler Fabrication are sole Copyright - 2014 |
| Standard length 2410 model shown |
| 12ft. 2-stage sluice box. [ 4ft. detachable steel "slick plate" not shown. ] |
| The 2410 comes complete with four fully adjustable leveling jacks to ensure stability. Jacks also swing up for transport. |
| Short video overview of typical sluice box for the 2410 & 2410-V Portable Gold Trommel Wash Plants. |
| 2410-EX with extended scrubber barrel section shown |
| 2410-EX with extended scrubber barrel section shown |
| Over sized Feed Hopper Is built to last Includes removable Grizzly Bar system & replaceable wear plates |
| Electric driven model [ 2410-E ] |
| Packed up & Leaving for British Columbia [ Axles removed for customs purposes ] |